A pneumatic rotary union is a mechanism used to transfer fluid (under pressure or vacuum) from a stationary inlet to a rotating outlet, preserving and isolating the fluid connection.
Pneumatic rotary union are engineered to endure a wide range of temperatures and pressures for a variety of conditions and environments. In addition, rotary unions may integrate multiple passages and handle different types of fluid simultaneously.
Rptary Uinons &Joints Spec(Part 3)
|Max. Operating Pressure|
|Passages(Gas/Flow)||8 in 8out|
|Outer diameter of tube||φ12mm,φ6mm|
|Circuits||total||72CKT||Working Speed||0~1 rpm|
|Detail||12x19A/ 4x10A/54x2A||Inner Diameter||/|
|Rating Voltage||240VAC||Contact Material||Precious Metal|
|Dielectric Stength||500vac@50Hz||Housing Material||Aluminum Alloy|
|Insulation Resistance||≥100MΩ500VDC||Lead Wire Length|
|IP||IP50(Horizontal installation)||Note:"P"stands for power ,"S"stands for signal|
LPPL000-08A-1219-0410-5402-EN -Outline Drawing
total 0 Sheet，Only 5 images can be uploaded, each less than 5m.