DetailInstallationReview(0)
LPT010-0602 Through-bore Slip Rings
A slip ring can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure. A slip ring is also called a rotary electrical interface, collector, swivel or a commutation. A slip ring can improve system performance by simplifying operations and eliminating damage-prone wires dangling from movable joints
| Electronic & Electruc | Mechanical | |||
| Circuits | Total | 6CKT | Working Speed | 0~300rpm |
| Detail | 6X2A | Inner Diameter | Φ10mm | |
| Rating Voltage | 240VAC | Contact Material | Precious Metal | |
| Dielectric Strength | 300VAC@50Hz | Housing Material | Engineering plastic | |
| Insulation Resistance | ≥200MΩ@300VDC | Lead Wire Length | Stator:300mm Rotor:300mm | |
| Environment | Remarks | |||
| Working Temperature | -20°C~+60° | Application | / | |
| Working Humidity | ≤60%RH | Other | / | |
| IP | IP50 | Note:"P" stands dor power, "S" stands for signal | ||
LPT010-0602-Outline Drawing
Name
Email*
*Phone
Message
Email: sales@electricslipring.com
HEAD QUARTER：Floors 1-4, plant 6, DeTai Industrial Zone, No. 496, Huarong Road, Langkou community,
Dalang street, Longhua District, Shenzhen, Guangdong
total 0 Sheet，Only 5 images can be uploaded, each less than 5m.