Metal collapsible tube of from a complete set of Capsule Slip Ringscontrasts watch Norms of metal collapsible tube of from a complete set of one-way swivel pipe joint and norms of swivel pipe joint are identical

Example:

Swivel pipe joint 4 " form a complete set 100 × 500 metal collapsible tube

Miniature Slip Rings 2 " deploy 50 × analogize of 500 metal collapsible tube

Change a measure:

D series:

 

1. Tears open tube below;

2. Opens 3, loose inner tube (one-way no),;

3. Takes out bedspring, moire valve;

4. Old seal ring and a fixed position are covered to take out at the same time;

5. checks attrition if deputy metallic face is level off, bright and clean, change a new seal ring to if metallic end is harsh,can be used, have nick, need abrade level off to just can be installed machine, had installed by contrary measure next;

6. Changes bearing, need to get on a Separate Slip Rings from equipment debus, an open bottom gland, take out with the tool with grave, press into, fixed bottom gland.

Q series:

1. Tears open whole of swivel pipe joint of equipment below; 2. Loose tube; 3. Tear open lid giving a ground; 4. Take out seal ring; 5. Corner sphere of the canal outside going out; 6. Take out the bearing that do not have oil; 7. Other consults D series.

H series:

1. Takes out bedspring card with bedspring clamp; 2. Hollow axis and axial duty is taken out at the same time; 3. The attention when holding seal ring stops turn annul load two semicircle chamfer inside; 4. The end panel of the seal ring and cone cannot be touched delimit; 5. Other consults D series.

Norms of Through Hole Slip Rings

Norms of metal collapsible tube of form a complete set

1. Tube is effective length, do not include two termination head.

2.65-100 is flange join, 8-48 is threaded coupling, but form a complete set transfers contact.